A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451

In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.     

应力为几何更新过程时结构可靠度

本文讨论应力为几何更新过程时结构可靠度，获得在设计基准期［０，Ｔ］内重复应力循环发生的次数服从几何更新过程时结构可靠度表达式。     

Kevlar/Nomex蜂窝夹层结构表面粘贴镀铜箔聚酰亚胺薄膜的工艺研究

文章对Kevlar面板Nomex蜂窝夹层结构表面粘贴镀铜箔聚酰亚胺薄膜的工艺进行了研究,分析了工艺特点、工艺流程、工艺难点,以及针对工艺难点所采取的工艺措施,最后根据产品的研制情况给出结论。     

四喷管射流流场的数值模拟及分析

本文分析了ENO格式的特点，并应用于全NS方程的迁移项和压力项，模拟了三维射流，首先计算了四喷管射流干扰流场，给出了相应的计算结果，指出了其四股射流外部有形成类似一股射流波系的趋势，而内部四股射流始终存在并相互作用，且伴随流对内部干扰流场有重要影响；然后计算了四股射流流入圆管内的流场，给出了壁面和截面物理量的分布，分析了其拓扑结构。     

圆波导圆柱轴＋平面叶片终端不连续性的计算

分析了圆波导中“圆柱轴＋平面扇形金属叶片终端”的不连续性，根据电磁场互易定理和物理光学法（ＰＯ）计算了这种终端对波导模的反射系数。这个问题的研究可用来解决喷气式发动机进气道对电磁波的反射，进一步地利用本文的结果可计算进气道的雷达截面（ＲＣＳ）或极化散射矩阵。     

统计技术在复合材料制造过程中的应用

统计技术是质量管理中进行质量分析、质量控制和质量改进的重要工具。文章阐述了统计技术在复合材料过程控制中的应用，探讨了其应用范围、作用、办法及相关说明等内容。     

有限空间轴对称射流流场的数值模拟

本文在к－ε紊流模型下，采用罚有限元法对有限空间轴对称射流流场进行数值模拟。引用罚函数优化迎风格式和退化积分，建立有限元解法的数值矩阵，在不同截面上求得工，压力和紊流参数分布，计算结果与实验数据十分接近。本文研究结果可应用于火箭发动机的喷射设计和射流量论的研究。     

4J32低膨胀合金的应用与切削加工及热处理

文中就4J32低膨胀合金在航天遥感器型号产品上的应用和切削加工及热处理进行了综述。分析了这种材料难切削加工的原因,并详细介绍了机械加工中采取的措施和工艺流程及具体的热处理方法。     

喷嘴控制脉冲调制器非线性特性分析

本文针对伪速率和脉冲调宽调频两种非线性脉冲调制器,利用频域理论讨论和分析非线性特性,描述函数采用数值解法和半解析法联合求取,较好地表述了这种非线性特性．     

进气道设计中的几个工程计算问题

本文对进气道设计中二维斜激波计算、圆唇口总压恢复系数估算、亚音速临界流量系数估算及最小喉道面积的确定等几个工程计算方法进行了改进,以适应在计算机上计算.计算精度满足设计参数选择的要求.